Swipe to see them all! Here's the first #EndGrain board getting finished up. First It gets run through the @grizzlyindustrial #DrumSander to flatten it out. I would normally run a piece through the planer but it'll blow out the sides of the end grain (I learned the hard way). Then over to the @festool_usa #Kapex #ChopSaw to trim up the rough edges. Afterwards I sanded er up. Again #Festool this time. The #Rotex and then the ETS150 sander. Got it done. Finally, I oiled it up with mineral oil…

Swipe to see them all! Here's the first #EndGrain board getting finished up. First It gets run through the @grizzlyindustrial #DrumSander to flatten it out. I would normally run a piece through the planer but it'll blow out the sides of the end grain (I learned the hard way). Then over to the @festool_usa #Kapex #ChopSaw to trim up the rough edges. Afterwards I sanded er up. Again #Festool this time. The #Rotex and then the ETS150 sander. Got it done. Finally, I oiled it up with mineral oil…

Festool ROTEX 150

Festool ROTEX 150

Festool Rotex RO 90 Multi-Purpose Sander 724001.  Got it ,best there is!

Festool Rotex RO 90 Multi-Purpose Sander 724001. Got it ,best there is!

Ponçage Festool

Ponçage Festool

Sanding to polish with the Festool ROTEX RO 150

Sanding to polish with the Festool ROTEX RO 150

Pinterest
Search