How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/
How to Build a Easy DIY Solar Pool Heater. All you need is 4 two foot lengths of pvc, 4 90 degree pvc elbows, foam pipe insulation, duct tape, 6 mil black plastic and some wire ties. The project takes less than one hour. This design works great for above and in ground swimming pools. http://www.diyeasycrafts.com/:
Charlotte Pipe 4-in dia 90-Degree PVC Elbow Fitting PVC 00300 1400
This furniture grade PVC elbow adjusts a from 90 to 270 degrees to change or move elements of a PVC structure or to obtain angles not possible with standard elbows. Fits inside of 1-1/4” Size Schedule 40 PVC pipe.
pvc pipe and pvc lattice. Connect the pvc at the top with pvc elbows. Tie the lattice to the pipes using screws or zip ties. Connect multiples together to create screen. Spray paint to colour of your choice!
How to build your own kayak cart that is lightweight and floats for $25. Purchase plans from this site. Appears to be made of push lawn mower wheels and axel surrounded by a configuration of PVC pipes and elbows. Covered in foam; that looks like a dollar store pool noodle. Add a web strap band to hold kayak to the cart.
PVC towel rack I bought three 10′ pvc pipes (3/4″)8 pvc standard T’s 2 pvc elbows 2 end caps (Note: make sure that the standard-T’s, elbows and caps are all the same size as the pvc pipe you’re using, and that they’re not threaded. The project won’t come together nearly as easily if things don’t fit) The towel rods were cut at 36″ each – which is the actual width of a standard beach towel. We built each side by starting with a 24″ piece of pvc (the bottom). Add a standard T Add a 8
Shop Vacuum Filter Often, I sand with really fine sandpaper, which can blow through my shop vac. filters when I clean up. I solved the problem by inserting a 1-1/2 inch PVC elbow into the exhaust port. Perfect fit in my Ridgid model. Then I attached an old pillowcase to the fitting with a hose clamp. Presto! Problem solved. If you don't get quite the fit you want, wrap duct tape around the fitting or pipe.