After cutting the conduit to sticker lengths, I cut them in half on my bandsaw, using a simple jig to hold the sticker in position (see photo, above). To keep the conduit from rotating during the cut, I follow a straight line drawn on its surface. To draw the line, I simply lay a flat board next the conduit and use the board as a straightedge.
vertical frame cable railing. designing a railing using vertically run cables as in-fill. Top and bottom rails are necessary in a vertical railing using cable,because mounting and tensioning hardware is attached to top and bottom rails instead of end posts. We recommend schedule 80 pipe or 2"x2"x1/4" square tubing for both the top and bottom rail, because of the forces applied when the cables are properly tensioned.