Pinterest • The world’s catalogue of ideas

This Candle has us soooooo ready for Christmas! ❤️ What about you? #PerfectChristmas


Diesel the Cane Corso


Do not roll the cane! REDUCING INSTRUCTIONS


swanwalk cane earrings with cabs, via Flickr. Demo of how to make the cane also on her flickr site. TUTORIAL: - scroll left.


I just pulled simple ribbon canes (lots) white sandwiched between two layers of transparent. The canes were I used were about 2-3mm in diameter when pulled. For the base beads: Some are opaque centers cased in clear, some are white centers encased in transparent color, then clear. Then just pull a nice tip on the cane and start wrapping starting close to the hole, careful not to get too close to the mandrel or the neighboring turns of the cane and carefully melt in. Mine aren't encased.


The Cane Creek Regulators: A Frontier Story (Hardcover)

The Cane Creek Regulators: A Frontier Story

from Etsy

Fresh polymer clay bus /bulli cane green

A piece of my fresh bus Fimo cane. 5cm x1,7cm The bus cane has no wheels. But I send black fimo extrude wheels with the cane. Put the wheels on the cane when you have reduced to your desired size. The Cane comes carefulli packed in foil in a small box for a safe shipping. green limited edition of 2

from Dora's Explorations

Building a Cane from Start to Finish

When I'm done reducing the cane to about 4" in length, I cut off two slices on the ends, and stand them up on a mirror to see what the cane will look like. Hmmm, not bad..

the canes- before reducing by orly rabinowitz, via Flickr


Here is the master cane after all the components have been added and the cane has been compacted but not reduced.  You are looking at a 1/4th inch thick slice I took off the back of the cane with m...