chinacoal03 Hydraulic Rail Straightener/Hydraulic Rail Bender/Rail Straightener YZ - 750 Ⅱ type hydraulic straight rail apparatus suitable for tracks the road 43 kg/ m ~ 75 kg / m various rail type transverse alignment (or bending) manual hydraulic special tool.
chinacoal03 Hydraulic Steel Hole Punch Tool/ Metal Hole Punch CH-70 Hydraulic Punching Tools CH-70 is a remote control tool, works with an external hydraulic pump (Hand Foot or Electric pump). It is designed to punch round holes on Cu/Al Busbar. With 4 pairs standard punching dies (10.5 / 13.8 / 17 / 20.5mm), punching hole size is between diameter 10.5mm and diameter 20.5mm. Busbar thickness should below or equivalent to 8mm. With hydraulic power, 4 pairs sharp punching dies, easy fast and c
chinacoal03 YQB-200X135 Hydraulic Track Lifting and Lining Machine , Hydraulic Lining Up Machine The machine is mainly composed of hydraulic transmission parts and leverage. Main structure features: this machine adopt manual operation, do not need other power consumption, mainly by manual lever to hydraulic drive the machine upper hooks for lifting movement, which has played a role, reasonable structure, easy to carry, is a practical machine.
chinacoal03 YTF-400II Hydraulic Rail Gap Adjusting Machine Rail gap adjuster description Hydraulic rail gap adjuster is to solve the problem of railway rail joint clearance (that is, rail gap) due to climate change and driving factors, such as its size change constantly. To make the rail gap back to the required size, must be string dynamic rail.
chinacoal03 YQJ-200 Hydraulic Railway Used Track Raising And Lining Machine YQJ-200 hydraulic track lifting and lining machine is specially used for the maintenance and repair of railway lines and the track bed. It applies to the track lifting and lining works of rails 43kg/m to 75kg/m, which can raise and adjust the track level. It is featured with high efficiency, simple operation, light weight, safety and reliability, a wide range of use etc.
chinacoal03 YD-22 Railway Sleepers Hydraulic Tamping Machine YD-22 hydraulic ballast tamping machine is a special purpose machinery used in the maintenance of the railway works.And It is mainly used for the ballast tamping of the rail sleeper. It is can be used to work in the interval time of the trains and no need for interval close. It has three kinds of engine, gasoline, diesel, motor.
chinacoal03 Rail Maintenance Hydraulic Rail Gap Adjuster Rail Gap Joint Regulator YTF400 rail gap adjuster (regular),the maximum pushing force is 40tons,at the normal situation,it could push 4-5 sets 12.5m 60kg/m rail,or it could push 2sets 25m 60kg/m rail. Rail gap will change because of the weather and driving factors. In order to get well the rail gap’s size,it need to adjust rail. For YTF400 rail adjuster,it could adjust 50kg/m,60kg/m,75kg/m rail.
chinacoal03 KWCY-600 Hydraulic Rail Bender Hydraulic Rail Bender, KWCY-600 Hydraulic Rail Bender, Hydraulic Rail Bending machine Product Introduction Hydraulic Rail Bender is used to on the rail under 24 gk/m and vertical curved track. Advantages: saving power, a person can complete the curved or straight rail track action, unloading fast, you can quickly get a lot of bends.
chinacoal03 YBD-147 Hydraulic Track Lifting and Lining Machine on Sale hydraulic up dial the way this unit is suitable for various models of rail line to track and dial the way homework, it has the advantages of novel structure, convenient operation, safe and reliable, and not intrusion clearance, working efficiency high, the weight of the characteristics of light. Also suitable for switch a dial the way homework, is railway works departments maintenance line necessary tools.
chinacoal03 Steel Punching Machine / Hydraulic Bus Bar Puncher for Steel Copper Aluminum Hydraulic Punching Tools CH-70 is a remote control tool, works with an external hydraulic pump (Hand Foot or Electric pump). It is designed to punch round holes on Cu/Al Busbar. With 4 pairs standard punching dies (10.5 / 13.8 / 17 / 20.5mm), punching hole size is between diameter 10.5mm and diameter 20.5mm. Busbar thickness should below or equivalent to 8mm. With hydraulic power, 4 pairs sharp punching