Explore Neo Magnets, Need For and more!

Explore related topics

These big motors are engineered to deliver high power for 35 - 45 lb (150cc) Patten, Scale and 3D-Aerobatic models with 12-14 cell LiPoly batteries.The A200-8, with it's 20 pole, outrunner design creates amazing torque, therefore larger direct drive props can be used without the need for a gearbox. These motors feature Oversized bearings, curved Neo-magnets and a High Efficiency stator design. www.Aero-Model.com

These big motors are engineered to deliver high power for 35 - 45 lb (150cc) Patten, Scale and 3D-Aerobatic models with 12-14 cell LiPoly batteries.The A200-8, with it's 20 pole, outrunner design creates amazing torque, therefore larger direct drive props can be used without the need for a gearbox. These motors feature Oversized bearings, curved Neo-magnets and a High Efficiency stator design. www.Aero-Model.com

Finishline RC "Truck Pulling" With funny Mini Slash Rampage!

Are you ready to have a super fun with RC mini slash car? These guys are practicing with the spectacular Finis

These A40 series motors are designed for 3D-Aerobatic models up to 6 pounds and Scale models up to 8.8 pounds using 3 to 6 series LiPoly batteries.  This 14 pole, Outrunner design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. Aero-Model.com

These A40 series motors are designed for 3D-Aerobatic models up to 6 pounds and Scale models up to 8.8 pounds using 3 to 6 series LiPoly batteries. This 14 pole, Outrunner design creates MASSIVE TORQUE, therefore larger direct drive props can be used without the need for a gearbox. This motor features Oversize bearings, Curved Neo-magnets, and a High Efficiency stator design. Aero-Model.com

Traxxas Velineon 3500 Brushless Motor

The world's premier supplier of radio control models.

JetCat P-200-SX Thrust: 	52 lbs @ 112,000 RPM     	Weight: 	5 LB     	Diameter: 	5.12 inches     	RPM Range: 	32,000 - 112,000 RPM   	Exhaust gas temp.: 	580C-690C     	Fuel consumption: 	24 oz per/min at full power   	Fuel: 	Jet A1, 1-K kerosene     	Lubrication: 	approximately 5% synthetic Oil in the fuel     	Maintenance interval: 	25 hours

Turbine Complete Now with internal kerosene start. No propane needed! Max Thrust: 52 lbs Engine Weight: lbs Diameter: Length: RPM Range: to Max Temp: Fuel Rate at Full Power: fl oz per minute

The A40-12L Electric Turbine is specifically for Extreme 3D Helicopters. This motor combines a high-efficient motor design with almost unbelievable power and improved cooling. It is an 8 Pole Inside-Outrunner design   Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft. www.Aero-Model.com

The A40-12L Electric Turbine is specifically for Extreme 3D Helicopters. This motor combines a high-efficient motor design with almost unbelievable power and improved cooling. It is an 8 Pole Inside-Outrunner design Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft. www.Aero-Model.com

France: GE’s Power Conversion Adds Inovelis to Its Offshore Systems Portfolio. novelis incorporates an electrically powered propeller with its motor housed within a steerable pod mounted beneath the hull of an offshore vessel.

“Inovelis™” Pump Jet Signals a Technological Breakthrough in Electrical Thruster Propulsion Technology for Offshore

The A40-10L Electric Turbine is specifically for Extreme 3D Helicopters. This motor combines a high-efficient motor design with almost unbelievable power and improved cooling. It is an 8 Pole Inside-Outrunner design   Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft. www.Aero-Model.com

The A40-10L Electric Turbine is specifically for Extreme 3D Helicopters. This motor combines a high-efficient motor design with almost unbelievable power and improved cooling. It is an 8 Pole Inside-Outrunner design Featuring: 8-Pole High-Temp Neo Magnets, low resistance windings, special Heli-Stator, Fan cooling, High RPM Bearings, and precision ground and hardened output shaft. www.Aero-Model.com

Pinterest
Search