surfboard project

A surfboard for kiting. My aim is a board the right size for me and strong with flex and under 1.9m which is required by some airlines I fly.
20 Pins10 Followers
Fridge compressor vacuum pump.

Fridge compressor vacuum pump.

Shaping room/garage/workshop/brewery/mancave

Shaping room/garage/workshop/brewery/mancave

Should have cleaned off the grubby finger marks.5'10" x 21". 9+5+5 eglass and epoxy deck and 9+5 bottom over 28kg eps. Came in at 3.2kg with tail pad and fins.

Should have cleaned off the grubby finger marks.5'10" x 21". 9+5+5 eglass and epoxy deck and 9+5 bottom over 28kg eps. Came in at 3.2kg with tail pad and fins.

A

Surfboard

Added extra glass to fin area. The brown stuff is peel ply.

Added extra glass to fin area. The brown stuff is peel ply.

Both sides glassed ready for sanding

Both sides glassed ready for sanding


More ideas
The blank ready to shape

The blank ready to shape

Shaping room/garage/workshop/brewery/mancave

Shaping room/garage/workshop/brewery/mancave

Hot wire 28kg eps

Hot wire 28kg eps

Boxes taped and ready

Boxes taped and ready

Taping top prior to glassing bottom turned out to be a mistake

Taping top prior to glassing bottom turned out to be a mistake

Evo templates 3mm mdf

Evo templates 3mm mdf

Peel ply and breather fabric.

Peel ply and breather fabric.

Futures boxes in place

Futures boxes in place

Pinterest
Search